SAIGA-12.com - E-STORE

25-round Drum for the Vepr-12 shotguns equipped with a FACTORY magwell.
These drums are manufactured in the US and count as 3 US made, 922R compliant, parts, therefore, accordingly marked "Made In The USA".

Saiga-12 25 Round Drum - Made In The USA (Tested in Saiga Shotguns Only)

Use Only 2 3/4“ Shells Over 1325 fps or Faster Winchester Super X for best performance

Fits: Saiga-12, Lynx-12, DDI-12, Cheetah-12

Original Russian Factory Molot 8-round magazine for Vepr-12 shotgun

NOTE: These magazines are manufactured in Russia for use with the models of the shotguns with a factory magwell.

Quantity VERY limited.

Made for the Vepr 12, the Chaos Vepr 12 Quad Rail System is manufactured to highest standards in the industry.

These MIL-STD-1913 rails are made from aircraft grade 6061 aluminum alloy.

Made for the Vepr 12 Shotgun.

The Chaos v12 Apollo is manufactured to the highest standards in the industry.

Elevated Steel Front Sight for Saiga-12 & Vepr-12 shotgun

Quantity VERY limited.

If you are looking for the most aggressive muzzle accessory on the market for your Saiga 12 or Vepr 12, then look no further. The "Chaos Warthog" not only looks mean, it is mean!

The side slots allow the escaping gases to push against the 60 degree surface causing a gas channel, forcing the gases to escape up and out.

Designed for Law Enforcement Entry Teams, Practical and Rugged

AK-47 Mini Replica 1/3 scale, non-firing model

AR-15 Mini Replica 1/3 scale, non-firing model

Belomo PK-06 is a modern sight with automatic adjustment of sighting mark's brightness and switching of sighting mark's type.

Designed for installation on various small arms using a standard Weaver \ Picatinny rail mount.

Sighting system includes a PK-AB collimator sight, a laser target designator and a tactical light.

Sighting system allows both accurate shooting at long distances and operative shooting at short distances with the help of a laser target designator.

The BelOMO collimator red dot sight PK-A is designed for fast target accusation and precise pointing at the target when shooting in different lighting conditions - during the day, at dusk, or conditions of insufficient visibility.

The SVD/SKS clamp will fit any of these rifles with the standard side rail: SVD, SKS, NDM-96, Russian Tigr, Romak-3, SSG-97 and PSL rifles.

The BelOMO collimator red dot sight scope PK-AB is designed for fast target accusation and precise pointing at the target when shooting in different lighting conditions - during the day, at dusk, or conditions of insufficient visibility.

The AK V-clamp can easily be mounted to any of the following rifles equipped with the standard side rail: AK-47, AKM, AK-74, Vepr, Saiga, K-var, KBI, Hesse, Century and Arsenal USA copies, Romak1/2, SLR-93, SLR-95, SLR-101, MK-11, SAR, WUM, SA85M, WASR (check for installed rail), Maddi, Norinco and Poly-Tech copies.

Russian AK scope, PK-AW collimator Red Dot, is designed for fast target accusation and precise target pointing while shooting in different lighting conditions - during the day, at dusk, or conditions of insufficient visibility.

Designed for installation on various small arms using a standard Weaver \ Picatinny rail mount.

Works on all AK47's, Saiga Rifles and Shotguns, Vepr Rifles and Shotguns.

UTG Sub-compact LED Light and Aiming Adjustable Red Laser LT-ELP28R.

2-in-1 Tactical Gen 2 Flashlight and RED Laser Combo with Integral Mounting Deck.

2-in-1 Tactical Gen 2 Flashlight and GREEN Laser Combo with Integral Mounting Deck.

Heavy-duty Full Metal Construction and Hard Coat Anodizing to Meet Harshest Requirements.

UTG's Unique, Original, and Enhanced Metal Tactical Grip Light - Best Design, Best Quality and Best Performance.

Innovative Steel Base with 2 Adaptors to Fit in the Rear Sight Housing of Both Full Length and Carbine Rifles.

Made from Aircraft Aluminum Matte Anodizing.

Reversible Grip With Two Different Ergonomically Serrated Contours.

Dehorned Corners, Melted Contours with a Slim Ergonomic Profile.

Reversible Grip With Two Different Ergonomically Serrated Contours.

Fits Model 4/15 Carbines with Rails Extending Beyond Front Sight.

Fits Most AK and Variants with Side Dovetail Rail.

Works on all Saiga Rifles and Shotguns equipped with the side rail.

Works on All Saiga Rifles and Shotguns Equipped with the Side Rail.

13" Extended Super Slim Handguard System Provides Additional Rail Space for Accessories and Improved Weapon Handling.

Features Optimal Profile (0.375" Saddle Height) for Versatile Accessory Attachments and Modular Applications

M-LOK(TM) 8-Slot Picatinny Rail Section Fully Compatible with Any M-LOK(TM) Mounting Platform.

Impact Resistant Matte Black Polymer Construction with a Nonslip Rubberized Grip Texture.

Picatinny Mounting Deck to Slide on and Screw Tight.

Simple Slide-on Mounting Deck for Most Solid Installation.

Ambidextrous Design with Fatigue-free Thumb Rest and Trigger Finger Shelf Offers Great Shooting Comfort in all Firing Positions.

For Use with Picatinny Rails to Provide Maximum Protection of the Rails and Safeguard Hands.

UTG Low Profile Keymod Compatible Rail Panel Covers

Encourages and Promotes Hand Placement Memory for Most Ideal Shooting Posture.

Mil-spec Stock Molded from Impact Resistant High-strength Polymer in Black.

Built for Heavy-duty Use with the Tightest Tolerance Controls

Clear and Sharp 4.0 MOA Dot Sight.

UTG Sub-compact Tactical Red Laser Sight with Only 1.14 in. Length.

Expanded Laser Dot with 8'' Dia. @ 50Yds for Instant Target Placement.

Expanded Laser Dot with 8'' Dia. @ 50Yds.

Premium Zero Lockable and Zero Resettable Target Turrets with Most Consistent and Precise 1/3 MOA per Click Adjustment

Broadband Multi-coated Lens to Provide Crystal Clear 3X Image.

Quick Aim Electronic Dot Sight with Red/Green Dual Illumination.

Built on True Strength Platform to Offer Durability and Precision Adjustment.

Butt Stock Adaptor Designed For AK and Variants with a Stamped Receiver.

Unique Tension Adjustable 360-degree Panning with Multi-axial Tilting Base to Achieve Virtually Any Desired Bipod Adjustment

Directly Attaches to Keymod Handguards at the 3 and 9 O'clock Positions

Directly Attaches to M-LOK Handguards at the 3 and 9 O'clock Positions

Innovative Compact, Lightweight, Super Low Profile and Ergonomic Design for Best Weapon Handling and Control

Converts AK Stock into Side Folding Retractable Stock.

Made from High Strength Steel with Black Finish.

UTG Keymod Sling Swivel Adaptor for QD Sling Swivel Applications.

Precision Machined from Aircraft Grade Aluminum with Hard Anodizing Matte Back Finish.

Adaptor Designed For AK and Variants.

Robust Steel Construction with Wear Resistant Matte Black Finish.

The BelOMO POSP 8x42 BDC PRO model features a reticle with a 1000-meter Rangefinder, Diopter with +3 to -3 adjustment range, PRO adjustment system for more accurate sighting at the target, and adjustable brightness level of reticle's illumination in low light conditions.

The BelOMO POSP 8x42 M6 BDC PRO model features M6-style crosshair reticle, Diopter with +3 to -3 adjustment range, PRO adjustment system for more accurate sighting at the target, and adjustable brightness level of reticle's illumination in low light environment.

The AK V-clamp can easily be mounted to any of the following rifles equipped with the standard side rail: AK-47, AKM, AK-74, Vepr, Saiga, K-var, KBI, Hesse, Century and Arsenal USA copies, Romak1/2, SLR-93, SLR-95, SLR-101, MK-11, SAR, WUM, SA85M, WASR (check for installed rail), Maddi, Norinco and Poly-Tech copies.

The BelOMO POSP 8x42 WDM6 PRO model features M6-style crosshair reticle, Diopter with +3 to -3 adjustment range, PRO adjustment system for more accurate sighting at the target, and adjustable brightness level of reticle's illumination in low light environment.

The mounting system allows for easy installation on any standart Weaver \ Picatiny rail system.

This grip is based off the factory Molot style grip used on the Molot VEPR-12 shotgun.

Color: Dark Earth

Counts as 1 us made part in 922r compliance.
Manufactured in USA by MD Arms, LTD.

*** EXCLUSIVELY FROM SAIGA-12.com *** Push button side folding stock for use on the Saiga and AK type rifles or shotguns with stamped receiver. This is a complete kit that includes a stock, a rubber pad, an adapter block, and screws.

Fits: Saiga-12, Lynx-12

Manufactured in USA. Counts as 1 US made, 922R compliant, part.

Fits: Saiga-12, Lynx-12

Manufactured in USA. Counts as 1 US made, 922R compliant, part.

Color: DARK EARTH

This choke set includes Modified, Full, and Extra Full.
Threads on to existing factory threads.

*** EXCLUSIVELY FROM SAIGA-12.com *** Push button side folding stock for use on the stock Saiga shotguns or rifles with stamped receiver. This is a complete kit that includes a stock, a rubber pad, an adapter block, pistol grip, and screws.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE STOCK GUN REQUIRED!

Manufactured in USA. Counts as 2 US made, 922R compliant, parts.

Rear Stock Trunnion with Pistol Grip - Polymer - Saiga & most AK-47.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE GUN REQUIRED!

Designed especially for Saiga shotguns and rifles. It has the balance and hefty look that the AK needs.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE GUN REQUIRED!

Manufactured in USA. Counts as 2 US made, 922R compliant, parts.

Fits most AK-47 rifles and all Saiga rifles.

NOTE: Does NOT work on Saiga Shotguns - there is a separate version that is made specifically for Saiga Shotguns.

Made for use with the factory buttstock or SGM Tactical Stock Kit.

Want to add a QD Sling Mount to your AGP Folding Butt Stock?

This Quick Disconnect Socket includes a Countersunk Fastener to attach it to your Butt Stock.

Designed for AK models, and Saiga shotguns and rifles with a pistol grip installed onto the reciever.

Black Tactical Kit includes:
Choose magazine qty included with this kit (magazine in the photo for demonstration only!)
1x KickLite stock with the recoil reduction system KLT005
1x Saiga-12 Tri-rail Forearm with weaver rail system.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE STOCK GUN REQUIRED!